Swit BM-U175 studio monitor features a 17.3-inch LCD panel, processes UHD resolutions up to 3840×2160p, 300 nits brightness LED backlight, 800:1 contrast, 91.5% DCI-P3 colour gamut and the viewing angle is H178° / V178°.
The monitor is equipped with 12GSDI (4- in 4 -out), HDMI 2.0, Quadlink 4K, Single Link 4K, Quad Link 8K and ST2110 IP inputs via SFP Fiber (Optional).
The LCD display processes HDR, and can be monitored via HLG, Dolvy vision PQ, Sony S-LOG3 HDR and Gamma 1.0/1.8/2.2/2.4/2.6.
17.3-inch 4K monitor
The BM-U175 has a UHD panel with the following features:
- 17.3-inch 8-bit+2FRC 17.3-inch LCD panel
- 3840×2160 UHD resolution
- 300 nits LED backlighting
- 800:1 contrast ratio
- DCI-P3 colour gamut of 91.5%.
- Viewing angle is H178° / V178°.
Multi 4K/8K Interfaces
The BM-U173 monitor is equipped with the following 4K interfaces:
12GSDI 4-in 4-out, supports:
- Single link 4K; Quad link 4K and Quad link 8K
- HDMI 2.0 (4K60P)
- 12GSDI via SFP Fiber (Optional)
- ST2110 IP via SFP Fiber (Optional)
* The Quadlink 4K/8K supports both Quad mode and 2SI interleave mode;
* The SFP optical fiber adaptor is optional purchased.
HDR/SDR EOTFs
The BM-U175 supports HLG (Hybrid Log Gamma), Dolby Vision PQ, Sony S-LOG3 HDR and Gamma 1.0/1.8/2.2/2.4/2.6 SDR EOFTs and colour gamut selection from the LCD panel, BT.709, DCI-P3 and BT.2020.
3DLUT Auto Self-Calibration
With X-rite i1 or JETI Specbos 1211
Swit BM-U175 has built-in 3DLUT calibration software and supports the "X-rite i1" and "Jeti Specbos 1211" probes which connect directly to the monitor's USB port.
The monitor generates colour patterns and the colour probes read the colour, sending the colour information to the monitor via USB. The monitor then compares the colour difference and generates 3DLUT and calibrates automatically.
- Calibration Time: X-rite i1 15min
- Specbos 1211 45min >Calibration Result: ΔE≤1.0
Dlog HDR/SDR LUTs
The monitor has built-in multi camera logs to HLG1000, PQ1000, Rec 709 SDR conversion LUTs, including Log-C, C-log, S-log2, S-log3, V-log, J-log1, RedLogFilm etc.
You can also upload User LUTs to monitor by USB disk, support 17x17x17 3DLUT cube files
Multiple Video Analysis Patterns
The monitor offers measurement of all technical video and audio parameters, has built-in 3DLUT calibration software, operates under zero video and audio latency and if required, can be remotely controlled via an IP web server.
Webserver IP Remote Control
BM-U175 allows remote control via web server over an Ethernet LAN connection.
Use your computer's web browser to open the monitor's control panel and select different input sources, adjust picture parameters, set up video/audio functions and assign function keys, etc., without installing any APP.
BM-U175 Monitor Features
- 17.3-inch LCD Panel, 3840×2160 resolution
- 12GSDI 4-in 4-out, 8K input ready, HDMI2.0 input
- 12GSDI via SFP Fiber input (Optional)
- ST2110 IP via SFP Fiber input (Optional)
- 3DLUT Auto Self-calibration without PC
- Audio/Video 0 latency for lip-sync
- HLG/PQ/S-log3 HDR EOTF
- Payload ID auto setting
- Built-in Multi camera Delog LUTs
- User 3DLUTs upload via USB
- Waveform / Vector / Histogram
- Focus assist / False color / Zebra
- 16-ch audio meters / Lissajous
- IP webserver remote control
- TSL UMD and text TALLY display
- USB firmware upgrade
- 19-inch rack mountable, 7U height